Select your language

Coatings for fresh ceilings

RevestimientosparatechosfrescosHeat is a factor that alters the comfort of a certain space. The use of roof coverings improves the conditions of the buildings and offers additional benefits.

 

by National Institute of Coating Technology, India.

 

- Publicidad -

Most of the world's ceilings are dark in color. Under a blazing sun the surface temperature of a colored roof can increase by up to 50 °C, reaching temperatures of 70 to 90 °C. This increased heat seeps into buildings and can cause negative effects on the energy used for cooling in buildings.

 

On the other hand, cool ceilings offer immediate and long-term benefits. The following are some highlights:
- Reduced heat retention, since a white or reflective ceiling usually increases only 5–14 °C above room temperature during the day.
- Savings of up to 15% on energy use from air conditioning in single-story buildings.
- Improves the energy efficiency of roofs, especially when there is no adequate insulation in the enclosures.
- Improves thermal comfort in buildings that do not have air conditioning.
- Reduction of emissions of air pollutants and greenhouse gases, as well as significant compensation for the warming effects of greenhouse gas emissions.

 

Cool ceilings allow energy savings in the cooling system during hot summers. White surfaces reflect more than half of the radiation that reaches them.

 

If all urban roofs and flat roofs located in hot weather locations were white, the consequent 10% increase in global reflectivity would offset the warming effect of 24 gigatons of greenhouse gas emissions, equivalent to removing 300 million cars from the roads over 20 years. This is based on the fact that a 1,000-square-foot (93 m2) white roof offsets  10 tons of carbon dioxide over its 20-year lifespan. This is based on a real large-scale case study work of cooling a higher reflectivity.

- Publicidad -

 

A 2012 study, conducted by researchers at Concordia University, looked at variables similar to those used in the previous study and estimated that the global installation of cool roofs and pavements in cities would  generate a global cooling effect equivalent to offsetting up to 150 gigatons of carbon dioxide emissions. enough to have all the cars in the world off the road for 50 years.

 

Advantages
Fresh roofing coatings provide high-performance thermal insulation coating from SK formulations, a fast-growing company that for more than a decade has offered superior quality polymer coatings.

 

These kinds of applications for cool roofs promise to reduce heat transfer from the outside to the inside of buildings and make homes, workplaces, floors, etc. more comfortable by keeping these structures cool in summer.

- Publicidad -

 

Coatings for fresh roofs can prevent more than 85% of solar radiation from being absorbed into the structure, thus providing protection against thermal shock, thanks to which the useful life of buildings is prolonged.

 

Energy conservation that results in cost reduction: In the scorching sun, coatings for fresh ceilings provide the much-needed cooling effect.

 

Unlike other conventional systems, cool roof coverings not only slow down the caloric transfer rate, but serve to stop it altogether. Consequently, thanks to a cooler outdoor surface, the operating cost of air conditioning is significantly lower, so electricity bills go down.

 

Lower costs
A surface coated with coatings for fresh ceilings requires virtually no maintenance. Because there is no need to waterproof and/or do an anticorrosive treatment, recurring costs are significantly reduced.

 

On the other hand, the cost of labor for carrying out regular maintenance is completely eliminated. Since cool roof coverings also increase the life of coated ceilings, there is no need to remodel a coated surface several times. Therefore, fresh roof coverings offer an overall reduction in maintenance costs. They can be applied on earthenware/terraces for similar benefits.

No comments

• If you're already registered, please log in first. Your email will not be published.

Leave your comment

In reply to Some User
PU Varnish DC0010

PU Varnish DC0010

Gricoat DC0010 PU Coating is a two-component clear coating designed to offer high gloss and...

Polyester Putty

Polyester Putty

Resinas S.A.S. Resinas S.A.A launched the New Polyester Putty 1A, a semi-rigid product designed...

Before color is character: the invisible art behind automotive refinishing

Before color is character: the invisible art behind automotive refinishing

Automotive paint, that final coat that seduces with its shine and protects with its composition,...

Argentine companies certified their plants under PCRMA standards

Argentine companies certified their plants under PCRMA standards

Argentina. The companies Sinteplast, Resinas Concordia S.R.L. and Brenntag Argentina S.A. (Zárate)...

Sherwin-Williams Reports Second Quarter 2025 Financial Results

Sherwin-Williams Reports Second Quarter 2025 Financial Results

International. The Sherwin-Williams Company announced its financial results for the second quarter...

Axalta Coating Systems Reports Strong Second Quarter 2025 Results

Axalta Coating Systems Reports Strong Second Quarter 2025 Results

International. Axalta Coating Systems Ltd., a leading global coatings company, reported its...

BMO Capital Reaffirms

BMO Capital Reaffirms "Best Performing" Rating for PPG Industries

International. BMO Capital reiterated its "Best Performing" rating and a $130 price target on PPG...

Global Powder Coatings Market to Reach USD 24.26 Billion by 2032

Global Powder Coatings Market to Reach USD 24.26 Billion by 2032

International. The global powder coatings market registered a value of USD 14.29 billion in 2023...

BASF launches styrene-acrylic dispersion for coatings and waterproofing

BASF launches styrene-acrylic dispersion for coatings and waterproofing

International. BASF announced the launch of Acronal 1542 ECO, a styrene-acrylic dispersion...

Advancement in coatings: triple resin system seeks to simplify surface protection

Advancement in coatings: triple resin system seeks to simplify surface protection

International. Advanced Polymer Coatings launched a new triple-resin coating system that combines...

Suscribase Gratis
Remember Me
SUBSCRIBE TO OUR ENGLISH LANGUAGE NEWSLETTER
DO YOU NEED A PRODUCT QUOTE?
HIGHLIGHTED INTERVIEWS
SITE SPONSORS










LATEST NEWSLETTER
Ultimo Info-Boletin